Ask anything about SMW Hacking - 2019 Edition - SMW Hacking Help

You can also rip it from other images
Here is a good tutorial on how to do that.

I know I may sound a bit like a noob for saying this but...... why are my exits not working on my overworld? I have one set working, but another where Mario walks on like nothing is there. 1 of 2 things happen with this:
1. The exit resets even if I save
2. I have the exits set properly, but it is just ignored

NOTE: I set them up the same way (but different names) as my first pair of exits, which work perfectly. They are the same set too, just one is the exit that looks like it is under the ledge. help? (P.S. please PM me your response if you can....)

So remember kids! If you ever get caught having tosave a princess from a foreign land after getting dragged down a drain pipe, jumping while spinning in a circle can help you greatly by allowing you to jump on spinning saw blades, ghosts, and allow you to control your jump better!

You sure you have configured secondary exits?

- Question
Can I change Mario's pallette to anohter sprite pallette, such as pallette 9?

$00:E18C 2 bytes Palette Mario's palette(left/right)

So yeah, I presume it works the same as any other yxppccct property bytes(or whatever the hell you call them), but I can't check. Remember that there is two bytes, though.

There was a signature here.

It's gone now.

Originally posted by Shellface

$00:E18C 2 bytes Palette Mario's palette(left/right)

So yeah, I presume it works the same as any other yxppccct property bytes(or whatever the hell you call them), but I can't check. Remember that there is two bytes, though.

Yeah, so the hex numbers you want to add are '02' and '42' to replace the '00' and '40'. (These are for palette 9)

Do note that it also does this for the OW, so you need palette 9 on the OW to be the same, or just get rid of Mario's sprite.

Cheers!
I will get back to you guys/this thread if I have any problems.

Hey I have a question a small simple question.

So I'm still kind of new to using YYCHR, but I wanted to use the spot light along with the castle sprites so I added in the spot light graphics to a copied castle sprites graphics since I didn't want to replace them permanently

Anyways my only question is in the Super GFX Bypass where do I load my GFX with the castle sprites and the spot light.

SP 1, 2, 3 or 4?

My Youtube Channel for Hacking and Gaming.

Originally posted by EvilGuy0613

Hey I have a question a small simple question.

So I'm still kind of new to using YYCHR, but I wanted to use the spot light along with the castle sprites so I added in the spot light graphics to a copied castle sprites graphics since I didn't want to replace them permanently

Anyways my only question is in the Super GFX Bypass where do I load my GFX with the castle sprites and the spot light.

SP 1, 2, 3 or 4?

Long answer, to make sure you've got it right:
What you will need to do is look at your Super GFX Bypass dialogue and see what GFX file is in SP4 (as this is the one that the spotlight uses). I will assume this is the normal castle sprites, SP4=3. Put the spotlight GFX into SP4, and you are done.

Short answer, because you probably don't want to read that:
SP4.

Your layout has been removed.

I want to change the pallette of mario so that it matches the cheepcheep GFX how would i do this easily?

I used to use this site a lot back in like, 2011. Hopefully you don't remember me.

Baconguy: Looks up this page, theres information on some of the stuff to change marios pallette.

Question: Im inserting various NPC's and each one Ive tried its just a glitched sprite that goes down the screen....

Are you sure you're setting the extra bits for the sprite correctly? for custom ones, it's 2 and 3.

why do I only answer your questions?

There was a signature here.

It's gone now.

I've got a problem with two exits. If I move the main entrance in a level the midway entrance moves the exact same hight as the main entrance. Is there anyway to fix this?

I Like to eat cake and pies that are not lies

No, Unfortunately, that is how SMW was written. There may be some way to hack it with ASM, but there is not simple solution.

Layout by LDA during C3.

Originally posted by PokefreakofBACON

Yes but if I do that, then putting a ramp over it would'nt work!

Yes it would. If you paste the palette-changed one on a new slot, then insert that block through the Insert Objects > Direct Map16 Access. and then put the triangle block over it.

Your layout has been removed.

hi im having trouble with the mario overworld sprite. ive been hacking for a while but stoped for a year or so and just got back in to it. i tried moving him to a diffeent spot on the map but everytime i try playing he keeps showing up in the original spot i didnt forget to save or anything either please help.

Have you tried using an empty save slot?

Yoshiegg Powerup Expansion
It's a patch about getting powerups other than a mushroom from Yoshieggs...
It's currently fully functional, but I'm still taking suggestions and want to fix any possible bugs...

I have a question:

The Magikoopa magic sprite doesn't move back or forth, which i don't want. I want to make it going downleft, and i would like to know if there is a hex edit, or do I have to insert a custom sprite?

damn i oughta kick myself in the ass for forgetting that lmao

How do i make a sideways muncher?

I used to use this site a lot back in like, 2011. Hopefully you don't remember me.

@PokefreakofBACON: I think the only way would be spinning the munchers to sideways in YY-CHR, inserting them as ExGFX and using ExAnimation to animate them.

Question: I'm using ExAnimation on the custom On-Off-Block to make its graphics change when an On-Off-Switch is hit. It all works fine, however the upper half of the block always changes like 2 or 3 frames before the lower half. I have seen a lot of hacks that didn't have this issue, so how would I fix this?

Edit: @Alcaro: Thanks, it worked!